Email icon

Set of 4 Tooth & Claw Molds NGSS

SKU #FSL-155
Availability: In Stock
Qty.
Reusable Latex rubber molds of fossil teeth and claws.

Tyrannosaurus Rex Tooth Mold - Small 3 inch mold

SKU #FSL-100
Availability: In Stock
Qty.

Tyrannosaurus Rex Tooth Mold - Large 4 inch mold

SKU #FSL-105
Availability: In Stock
Qty.

Shark Tooth Mold - 3 inch Mold

SKU #FSL-120
Availability: In Stock
Qty.

Deinonychus Claw Mold - 3 and a half inch Mold

SKU #FSL-130
Availability: In Stock
Qty.

Description

These professional quality Latex rubber molds can be used to make literally hundreds of fossil replicas. Simply use a rubber band to hold the two halves of the mold together, pour in some plaster of Paris (or even better, our PerfectCast casting medium) and in about 30 minutes your students will have a perfect fossil replica of a tooth or claw! The finished casting may be painted or polished with shoe polish to give it a completely realistic look.

Each mold consists of two separate halves which are held together with rubber bands during the casting process. Each mold has been created from a real fossil and is totally authentic. Your students will love them all! Our molds are durable and use only a few cents in casting medium per mold. This is the best way to let your students take home a piece of history. Instructions included!

Lesson Ideas

Download the pdf of this lesson!

Materials:

Included:

  • Rubber seam line mold (2 halves)
  • Rubber bands
  • Instructions

Not included:

  • Casting medium (PerfectCast #FSL-310 or Plaster of Paris)
  • Tablespoon or measuring spoons
  • Mixing container (paper or plastic cups work well)
  • Mixing utensil (popsicle stick or spoon)
  • Water
  • Nail file (optional)

Instructions:

  1. Fit the two pieces of the mold together in the correct position and secure the two halves together with rubber bands.
  2. Into a disposable cup or container, measure approximately 2.5 tablespoons of cool water. Add 6 tablespoons of casting medium. (Please refer to the instructions for the casting medium for exact measurements.) Immediately stir until the mixture is evenly mixed and smooth (~1/2 minutes). Tap the cup on the table a few times to bring any bubbles in the mixture to the surface.
  3. Fill the mold through the small hole to the top with the casting mixture. Tap the mold lightly on a table, tilting it in all directions to dislodge any air bubbles from the sides of the mold and bring them to the top of the mixture. Do not pour any extra casting mixture down the drain! The extra plaster and the cup should be thrown in the trash. Wash the mixing utensil and measuring spoon before the mixture hardens.
  4. Let the filled mold sit undisturbed for at least 30 minutes, or until the cast is warm and hard. After the mixture hardens, carefully separate the sides of the mold and very carefully remove the cast. (Note that the plaster has not fully dried, and may still be slightly soft.)
  5. Carefully break off the funnel-shaped projection (spur) from the top of the cast. File away any seam lines from where the mold came together. Let your fossil replica dry completely before finishing.
  6. To finish your fossil replica, paint or stain it with earth tones (browns or black). We have found that brown shoe polish works extremely well. Simply rub on a heavy coat with a cloth, then rub off. Buffing afterwards will bring out a slight shine and give the appearance of natural weathered bone. You may also try staining your fossil with dark colored wood stains or even tea.
Write a Review

Reviews

6 reviews
Teacher
Review star icon Review star icon Review star icon Review star icon Review star icon Dec 12, 2015
I was very pleased with my mold. It was exactly what I needed!
Julia

Was this review helpful?

0   0

4
Review star icon Review star icon Review star icon Review star icon Review star icon Dec 17, 2014
I've had great success with these molds and expect this one to be great too! Well made and long lasting.
Bob Martin

Was this review helpful?

0   0

Geology camp hit!
Review star icon Review star icon Review star icon Review star icon Review star icon Jul 29, 2012
The mold worked well. My husband made 25 teeth in a week for a geology camp. The campers loved them and painted them to look even more realistic!
Michelle Peterson

Was this review helpful?

0   0

Fossil Molds
Review star icon Review star icon Review star icon Review star icon Review star icon May 21, 2012
My Kids' College students really enjoyed both making and painting these,
Kathy Wolfram

Was this review helpful?

0   0

Awesome great piece mold looks awesome
Review star icon Review star icon Review star icon Review star icon Review star icon May 20, 2012
The claw looks awesome, we have used it a ton...
Kevin

Was this review helpful?

0   0

Awesome simple use
Review star icon Review star icon Review star icon Review star icon Review star icon May 7, 2012
Love the stuff ordered another casting .. only issue the T Rex tooth looks like a Sabertooth . but it still rocks... cast all the time...
Kevin

Was this review helpful?

0   0

NGSS

This product will support your students' understanding of the Next Generation Science Standards (NGSS)*, as shown in the table below.

Suggested Science Idea(s)

4-ESS1-1
MS-ESS1-4
MS-LS1-3
MS-LS4-1
MS-LS4-2
HS-ESS1-4
HS-LS4-5

Students can use the Tooth and Claw molds as part of an investigation to gather information and evidence to support claims for early life in the Geologic History of Earth.

Students can use the Tooth and Claw molds and plaster to make their own fossil reproductions. This will allow students to manipulate the body part to make predictions about the animal.

 

* NGSS is a registered trademark of Achieve. Neither Achieve nor the lead states and partners that developed the Next Generation Science Standards were involved in the production of, and do not endorse, this product.

Q & A



You May Also Like